Lubrication Unit

Drip (Lub) Lubrication:

Drip (Lub) Lubrication offers centralized lubrication unit. Lubrication unit consists of electrical motor, gear pump, monoblock, float switch, air breather suction strainer, oil window and MS tank. Several types of systems are available depending on the type of motor, pump output and tank capacity. Motor used is 3-phase, 1,440 RPM, 0. 1/0. 1 6 HP or single phase 1,440 RPM. Gear pumps are used for positive displacement of oil. Range of pumps covers 0.25, 0.5, 1, 2 and 3 LPM at 1,440 RPM with pressure from 2 to 15 kg/cm3. Lubrication unit relief valve is provided to ensure line pressure and the settings possible are from 2 to 12 kg/cm3.

Lubrication unit Pressure gauge is provided on the manifold to indicate the line pressure. Lubrication unit Tank is MS fabricated and powder coated. Lubrication unit Oil window is provided to indicate the oil level in the tank. Lubrication unit Vertical float switch is provided on the tank to give the low level indication. Normally NO is provided but NC or NO-NC contacts can also be provided in Lubrication unit. Air breather with filter is provided on the tank to fill the oil in the tank. A 20-micron suction strainer is provided at suction end of the pump to suck filtered oil. Tank capacities are available in 3, 5, 10 and 15 liters. User areas are: machine tools, press brakes, CNC centers, SPMs, ball mills, textile machines, printing machines, gearbox lubrication, spray driers, plastic moulding machines, die casting, etc.vv